[Sticky] 📡 Ultimate MAG Box IPTV Setup Guide (MAG 254, 322, 351, etc.) 📡

Got a MAG device? Follow this simple guide to set up IPTV in minutes—no technical skills needed!

🔌 What You'll Need

✔️ MAG Box (254, 322, 351, 420, etc.)
✔️ Portal URL from your provider (format: http://example.com:8080/c )
✔️ Wired Ethernet connection (highly recommended)
✔️ Remote control

🚀 Step-by-Step MAG Box Setup

1️⃣ Connect Your Device

1. Plug in power + Ethernet cable (Wi-Fi works but causes buffering)

2. Turn on device - wait for Infomir loading screen

2️⃣ Enter Your Portal (3 Ways)

Method 1: Quick Setup (First Boot)

1. On startup, press "Menu" on remote

2. Select "Installation" > "Server"

3. Enter your portal URL exactly as provided

4. Press "OK" to save

Method 2: Through Settings

1. Press "Settings" (wrench icon)

2. Go to "Servers" > "Portals"

3. Add new portal:

• Name: Your provider's name
• URL: Full portal address

1. Set as default > "OK"

Method 3: Using Remote Shortcut

1. Press "Settings" button

2. Quickly type 3227 (for MAG 322) or 2227 (for MAG 254)

3. Portal configuration will appear instantly

🔧 Troubleshooting MAG-Specific Issues

🔴 "STB Blocked" Error
➡️ Contact provider immediately - your MAC address may be banned

🟠 "Invalid Portal" Message
➡️ Double-check URL format (must include http:// and port like :8080)
➡️ Try alternative portal URL if provider offers one

🟡 Channels Freezing/Pixelating
➡️ Always use Ethernet - MAG boxes perform poorly on Wi-Fi
➡️ Check internet speed (minimum 15Mbps for HD)

🟢 No EPG (TV Guide)
➡️ MAG boxes auto-download EPG from portal
➡️ Wait 24 hours - if still missing, contact provider

⚠️ Important MAG Box Notes

• NO M3U Support: MAG devices only work with portal URLs
• NO VPN: Must use VPN router if ISP blocks IPTV
• Firmware Updates: Go to Settings > Software Update
• Factory Reset: Settings > System > Factory Reset (last resort)

❓ Need Help? Post Your Issue Like This:

- MAG Model: [e.g., 254, 322, 351]
- Firmware: [Find in Settings > Info]
- Error: [e.g., "STB Blocked after update"]
- Tried: [e.g., "New portal URL, Ethernet, power cycle"]

MAG experts will help you fix it!